SVG to DST Converter
Convert a vector drawing into a DST embroidery file at the width you set in millimetres.
Free · runs in your browser · nothing is uploaded
Recent
Your last 10 settings, saved only in this browser. Nothing is uploaded.

How to use the SVG to DST converter
- Press Choose SVG file, or drop an SVG on the page. You can also open Or paste SVG code. Try a sample loads a small example.
- Set Width (5 to 600 mm, default 80). The whole SVG page (its viewBox) is scaled to that width with its proportions kept, so artwork with empty space around it stitches out narrower. Size under the preview is the real stitched size.
- Set Stitch density (row spacing) (0.25 to 0.8 mm, default 0.4). Smaller values put the rows closer together.
- Set Stitch length (1 to 6 mm, default 3).
- Choose an Outline: Running stitch (default), Satin column or None.
- Keep Underlay ticked for the base stitching under each fill, or untick it for a plainer result.
- Leave File format on DST (Tajima), or pick PES (Brother), EXP (Melco) or JEF (Janome).
- Read the line under the preview: Size, Colors, Stitches, Jumps and Thread (est.). The note below it lists the hoops the design fits.
- Press Download DST.
On a small test design with the default settings the tool reported 3,385 stitches, 6 jumps, 2 colours, 60.3 by 40.3 mm and 12.1 m of thread. The file also held 6 trims. Your SVG will give different numbers.
Start from an SVG made of a few solid shapes, and convert text to outlines in your editor first. Use a small Width to test, because a larger design has many more stitches. Keep your SVG, since the DST file cannot be turned back into the drawing.
What is DST format?
DST is the Tajima embroidery format, a binary file that starts with a 512-byte header followed by 3-byte stitch records. It stores needle moves and colour-change stops but no thread colours, so you choose the threads at the machine.
The header holds the design label (LA), the stitch count (ST), the colour changes (CO) and the extents of the design. Each record moves the needle by at most 121 units of 0.1 mm, which is 12.1 mm. Longer moves are split into equal jumps, so a 250 mm move becomes 21 jumps.
How does stitch length change the stitch count?
Each row of a fill is sewn in steps of the stitch length, so longer stitches mean fewer stitches. For a fill, the count is about the number of rows times two plus the row length divided by the stitch length. In an engine test a 20 x 20 mm square at 0.4 mm spacing gave 50 rows and 436 stitches, against 433 from this formula.
| Stitch length | Estimated stitches, 20 x 20 mm at 0.4 mm |
|---|---|
| 1 mm | 1,100 |
| 2 mm | 600 |
| 3 mm (default) | 433 |
| 4 mm | 350 |
| 6 mm | 267 |
Only the fill uses Stitch length. The running outline has its own fixed step of 2.5 mm. Very short stitches also put more needle holes in the fabric.
DST vs PES vs JEF: which format should I pick?
Pick the format your machine reads. DST is the Tajima format and the menu default. Choose PES for Brother, JEF for Janome and EXP for Melco. If you are unsure, check your machine’s manual.
| Format | Menu label | Thread colours in the file |
|---|---|---|
| DST | Tajima | None |
| PES | Brother | Nearest Brother thread colour, version 1 file |
| JEF | Janome | Nearest Janome palette colour |
| EXP | Melco | None |
Which SVGs work best?
SVGs made of simple solid shapes with clear edges stitch best. Gradients, photos, text, masks and filters are not converted, so turn text into outlines in your editor first. Self-intersecting shapes such as bow ties are skipped, and shapes under 1 square mm are left out. Each different fill colour becomes one colour stop.
What does automatic digitizing leave out?
No lock stitches are added at the start and end. The files were checked by reading them with pyembroidery 1.5.1, not by sewing them on a physical machine. The hoop check uses four fields from Brother’s manual (100 x 100, 130 x 180, 200 x 200 and 200 x 360 mm), in either orientation, with no margin subtracted.
Answers to common questions
What machines read DST files, and what opens one?
Many machines and programs read Tajima DST, but check your own manual for the list. Embroidery software opens the file. A text editor shows only unreadable bytes.
Which SVGs are embroidery-friendly?
Solid shapes with clear edges and a few fill colours. Photos, gradients, text and filters either fail to convert or stitch badly.
Is SVG to DST conversion lossless?
No. Shapes are rebuilt as stitches and DST positions are stored in steps of 0.1 mm, so the stitched design is an approximation of the drawing.
What stitch length should I choose?
Start with 3 mm. Shorter stitches give a denser fill and more stitches, longer ones give fewer.
Is my SVG uploaded?
No. The work runs in your browser and the page makes no upload request.
Can I convert several SVG files at once?
No. The page converts one SVG at a time. Load the next file after downloading the first.
How many colours should the SVG have?
Use as few as the design needs. Each fill colour is one colour stop, and DST carries no thread colours, so you assign the real threads at the machine.
Why are some shapes missing from the file?
Self-intersecting shapes and shapes under 1 square mm are left out, and text, images and filters are not converted. The page reports how many small shapes were skipped.
Related tools
- SVG to PES Converter: use it when your Brother machine needs a PES file.
- Image to Embroidery File: use it when your source is a picture rather than vector art.
- Embroidery File Converter: use it to change an existing stitch file from one format to another.
- SVG Simplifier: use it to cut nodes from a detailed SVG before digitizing.
- SVG Optimizer: use it to strip extras from an SVG before converting it.
- Embroidery Tools: use it to see every embroidery page here.
- Reduce Image Colors: use it to prepare a picture with fewer flat colours.
- Convert Image to Cut File: use it when you need a cutting file rather than stitches.