Resize SVG
Set the real size of an SVG in millimetres so Cricut, Silhouette or laser software opens it at the right scale.
Free · runs in your browser · nothing is uploaded
Recent
Your last 10 settings, saved only in this browser. Nothing is uploaded.

How to use the SVG resizer
- Click Choose SVG file, or paste the markup into Or paste SVG code. Try a sample loads a test drawing.
- Set Width from 5 to 600 mm. The default is 100.
- Leave Height (0 = from width) at 0 to take the height from the width and keep the proportions. To set a height yourself, move the slider from 0 to 600 mm.
- Keep Keep proportions ticked to fit the drawing inside the width and height box. Untick it to stretch the drawing to fill the box exactly.
- Check the Size figure under the preview, then click Download SVG.
Every change resizes the file again, so you can change the numbers and watch the size update. Reset settings returns the defaults. The output keeps the drawing as vector paths, and the Size figure under the preview shows the width and height in mm. After downloading, open the file in the program you will use and compare the size it shows with the figure on this page, since this page cannot say how other programs read the file. If the sizes differ, check the units that program reports before you cut or print anything, and test on scrap material or a draft sheet first.
How do I resize an SVG file?
Set the Width in millimetres and, if you want a fixed height, the Height as well. The tool writes the two values into the width and height attributes of the root svg tag, for example width=“100mm” and height=“50mm”. The viewBox, which holds the drawing’s own coordinates, stays as it was, so the browser or program scales the whole drawing to the new box.
If the file has no viewBox, the tool adds one from the size it finds, so scaling still works. If it cannot find a usable size, it returns the file unchanged, so the download then matches your upload byte for byte.
What size does the SVG come out at?
The table below was measured from this tool on an SVG with a 200 x 100 viewBox, a 2:1 shape. With Height at 0 the height follows the width. With both set and Keep proportions on, the drawing is fitted inside the box, so one of the two numbers shrinks.
| Width | Height | Keep proportions | Output size |
|---|---|---|---|
| 100 mm | 0 | on | 100 x 50 mm |
| 50 mm | 0 | on | 50 x 25 mm |
| 600 mm | 0 | on | 600 x 300 mm |
| 100 mm | 40 mm | on | 80 x 40 mm |
| 80 mm | 30 mm | on | 60 x 30 mm |
| 100 mm | 100 mm | on | 100 x 50 mm |
| 100 mm | 100 mm | off | 100 x 100 mm, stretched |
In the 100 x 40 row the box is wider than the drawing, so the width drops to 80 mm. With Keep proportions off the tool also adds preserveAspectRatio=“none” to the root tag, which is what lets the drawing stretch.
Can I resize an SVG without losing quality?
Yes. An SVG stores shapes as paths, not pixels, and this tool does not rewrite them. Only the size attributes change, so a drawing resized from 50 mm to 600 mm has the same edges as the original. Stretching changes the shape of the drawing but not its sharpness. Round shapes become ovals when you stretch, so use it only when you want that.
Answers to common questions
Can SVG images be scaled?
Yes. A drawing sits inside a viewBox, and the width and height of the file decide how large that box is shown. This tool changes only those two attributes and leaves the viewBox and paths alone.
How can I make my SVG file size smaller?
Resizing does not shrink the data in the file, so the byte size stays about the same. To reduce the bytes, use the SVG Optimizer. To reduce the number of points in the paths, use the SVG Simplifier.
What happens if my SVG has no width or height?
The tool adds a viewBox based on the size it can find, so you can still set a new size in millimetres. If the file has no usable size at all, it is returned unchanged.
Can I use inches or pixels?
No. The sliders work in millimetres only. To convert, multiply inches by 25.4, for example 4 in is 101.6 mm, and note that the slider moves in whole millimetres.
Is my file uploaded?
No. The resizing runs in your browser and the page makes no upload request. The engine loads the first time you use the tool.
Does it change the colours or the paths?
No. Only the root tag is edited: width, height and, when needed, viewBox and preserveAspectRatio. Colours, strokes and path data stay exactly as they were in your file.
Related tools
- SVG Optimizer: use it when you need the SVG file itself to be smaller in bytes.
- SVG Simplifier: use it to reduce the number of path points in a complex SVG.
- SVG to G-code Converter: use it when the sized drawing is going to a laser as G-code.
- SVG for Laser Cutting: use it to turn an image into a cut-ready SVG with a width in mm.
- Reduce Colors in Image: use it when a picture has too many colours for a simple cut.
- Posterize Image: use it to turn a photo into flat colour bands for stencils.
- Image & SVG Tools: use it to see every image and SVG tool on this site.
- Convert Image to Cut File: use it when you start from a raster image.