Stipple Image Generator
Turn a photo into a stipple drawing made of dots whose density follows the shading.
Free · runs in your browser · nothing is uploaded
Recent
Your last 10 settings, saved only in this browser. Nothing is uploaded.

How to use the Stipple Image Generator
- Drop a picture on the tool, paste one, or press Choose image. Try a sample loads a demo. Pictures with clear light and dark areas, such as portraits, animals and plants, stipple well, and a plain background saves dots for the subject.
- Set Width (5 to 600 mm, default 100). The height follows the proportions of the picture, and the size line under the preview shows the finished width and height in millimetres.
- Set Dots (200 to 12000, default 3000). More dots mean finer tones and smaller individual dots.
- Move Contrast (-100 to 100, default 0) if the tones look flat or harsh.
- Tick Invert to put the dots where the picture is light instead of dark. It helps when a light subject sits on a dark background.
- Read the dot count in the line under the preview and compare Original and Result if you want to check likeness.
- Press Download SVG for editing or laser software, or Download PDF for printing.
Open the downloaded file in your design, laser or print software and check that the size reads as the width you entered before you start a long job. Changing a setting and changing it back gives exactly the same layout, because the random seed is fixed. Reset settings brings back every default.
How do I convert an image to stipple art?
Load the picture, choose the finished width, set a dot count and download the file. The tool measures how dark each part of the picture is, places the dots where it is darkest, and spaces them out evenly so they do not clump. You pick the amount of detail through the dot count.
- Start with 3000 dots at 100 mm.
- Go higher if faces or fine edges look blotchy, lower for a looser, more graphic result.
- Adjust Contrast before adding dots; a flat photo needs contrast more than it needs more dots.
- Download as SVG or PDF.
How does the tool decide where the dots go?
Dots are placed by weighted Voronoi stippling, a method described by Secord in 2002. Points start at random positions weighted by darkness, then 20 rounds of Lloyd relaxation move each dot toward the centre of its own cell. The run uses a reduced copy of your picture, so large photos do not slow it down.
How big are the dots?
Every dot has the same radius: 0.2 times the average spacing between dots, which depends on the picture area and the dot count. Tone therefore comes from how many dots sit in a region, not from dot size. The table shows the diameter for a square picture 100 mm wide.
| Dots | Average spacing | Dot diameter |
|---|---|---|
| 200 | 7.07 mm | 2.83 mm |
| 1,000 | 3.16 mm | 1.26 mm |
| 3,000 (default) | 1.83 mm | 0.73 mm |
| 12,000 | 0.91 mm | 0.37 mm |
Dot diameter scales with width, so the same settings at 200 mm give dots twice as wide. If the dots must be a certain size for a pen, a marking laser or a printer, pick the width and dot count from this table.
Which file should I download, SVG or PDF?
Download SVG when the dots go into other software: the file holds one circle per dot, and its width and height are written in millimetres, so editors and laser programs open it at the size you chose. Download PDF when you only want to print or share it, because the page is cut to the artwork with no margin.
What subjects work best for stipple art?
Pictures with smooth shading and a clear subject work best: portraits, animals, plants and still lifes. Busy backgrounds eat dots that the subject needs. A plain background helps, and so does a higher Contrast value.
Can I make a coloured stipple image?
The output is black dots only. The circles sit in one group in the SVG, so you can recolour them in a vector editor afterwards, but the tool itself has no colour option.
Answers to common questions
What is stipple art?
Stipple art builds an image from many separate dots, with dark areas made by packing dots closely and light areas by leaving gaps. The dot pattern is read as tone from a distance.
Is stippling the same as pointillism?
No. Pointillism is a painting style that sets small dots of pure colour side by side. Stippling here means black dots whose density carries the tone, and this tool makes only that kind.
Does the tool use AI?
No. It runs a fixed algorithm, so the dots depend on your picture and the settings you chose, and a second run gives the same file.
Can I use the result for a tattoo?
You can use the dot layout as a reference for dotwork, because the page shows spacing and dot size at the width you set. It makes a dot pattern from your picture, not a tattoo design.
Will I get the same dots every time?
Yes. The random seed is fixed, so the same picture and settings always produce the same layout, and you can change a setting and change it back without losing your result.
Can I get fewer dots than 200 or more than 12,000?
No. The slider covers 200 to 12000 dots. For a coarser dot grid with varying dot size, try the Halftone Generator.
Related tools
- Halftone Generator: Use it when you want dots on a regular grid whose size changes with tone.
- Image to G-code: Use it to engrave a picture line by line with a GRBL laser.
- Laser Engraving Image Converter: Use it to dither a photo into a 1-bit image for laser software.
- SVG for Laser Cutting: Use it to prepare the stipple SVG for a laser cutter or engraver.
- Photo to Line Art: Use it when you want clean outlines instead of dots.
- Posterize Image: Use it to flatten a photo into a few tones before you stipple it.
- Convert Image to Cut File: Use the home page tools when the end goal is a vinyl or craft cutter file.