Skip to content
Find a tool

Stencil Maker

Type a name or drop a picture and get a stencil whose letters and shapes stay in one piece.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

This stencil maker builds a cuttable stencil from either a picture or a word you type. The dark parts become cut-outs, and any island of material that would drop out, such as the centre of an O or an 8, is joined back to the stencil with a bridge. The default is a 150 mm wide stencil with 2 mm bridges, and you can change the width from 5 to 600 mm and the bridges from 0.5 to 6 mm. Typed text can be up to 60 characters in one line of heavy sans-serif type. You download SVG, DXF, PDF or PNG, and the stats line shows how many islands and bridges the stencil has.
Stencil maker example

How to use the Stencil Maker

  1. Drop a picture on the tool, or open Or type text instead of an image and enter a word or name (up to 60 characters). Try a sample loads a demo.
  2. Set Width (5 to 600 mm, default 150). For typed text this is the width of the whole text picture, margins included, so a short word comes out narrower than the figure you enter.
  3. Leave Black and white threshold on automatic, or raise it toward 255 to treat more tones as dark. Dark areas are cut away.
  4. Set Bridge width (0.5 to 6 mm, default 2) for the strips that hold islands in place.
  5. Set Drop islands smaller than (0 to 10 mm, default 1) to remove tiny specks.
  6. Raise Remove specks up to (0 to 40, default 8) or Smoothing (0 to 100, default 50) if edges look rough. Brightness, Contrast and Invert help with photos.
  7. Check Islands and Bridges in the stats line, and compare the Original and Result tabs.
  8. Press Download SVG, Download DXF, Download PDF or Download PNG.

The type is drawn in Impact or Arial Black when your device has it and in a bold sans-serif otherwise, so letters can differ slightly from one computer to another. Check the preview before cutting, and cut a test piece first.

How do I make a stencil from typed text?

Open the text box under the image drop area, type a word, and the tool draws it in heavy type, turns the dark letters into cut-outs and bridges the loose centres. The text is one line, up to 60 characters, and it is squeezed horizontally to fit when it is long.

Letters with closed counters need bridges because the counter is material surrounded by cut-out. A heavy sans-serif gives one bridge per counter:

CharacterEnclosed islandsBridges added
O, A, 0, 4, 6, 911
B, 822

Fonts differ, so a style with open counters may need fewer. Each bridge also splits the neighbouring cut-out in two, which is why a stencil font looks the way it does. Increase Bridge width for thin or soft material, and keep it narrow if you want the letters to stay readable.

How do I turn my image into a stencil?

Load the image, set the width, and use the threshold to decide where black and white split. Then read the island and bridge counts and download the file in the format your cutter or software wants.

  1. The picture is scaled to at most 1,200 px on its long side.
  2. The threshold (automatic or your value) splits it into cut and material.
  3. Specks smaller than Drop islands smaller than are cleaned up.
  4. Each island is joined to the main body by the shortest bridge path.
  5. The shape is traced to vectors at the width you set.

What are stencil bridges and why do I need them?

A bridge is a strip of material left across a cut-out so that an enclosed piece stays attached. Without bridges, the centre of an O would drop out of the stencil. This tool places one bridge per island at the Bridge width you choose. Bridges cannot be switched off, and the thinnest is 0.5 mm.

Which file formats can I download?

FormatContents
SVGVector shapes sized in mm
DXFThe same shapes for CAD or laser software
PDFVector page cut to the artwork
PNGBlack-and-white bitmap, black cut and white material

Can I use my Cricut to make stencils?

Cricut Design Space takes SVG uploads. Download the SVG and upload it as an image, then check the size shown against what you set. Cut a test piece first; materials and blades differ.

Answers to common questions

Is there a limit on how many stencils I can make?

The page has no account, credit counter or watermark, so you can make as many as you need.

What happens to my photo?

It is processed in your browser and is not uploaded.

Do I need to download an app?

No. The tool is a web page and nothing is installed.

Can I upload large files?

The page sets no size limit, and large pictures are scaled down to 1,200 px on the long side before the stencil is made. A very large file depends on your device’s memory.

Can I choose the font for typed text?

No. The text is drawn in one heavy sans-serif style, Impact or Arial Black where installed. To use another font, set it as a picture in another program and load that image.

Can I type more than one line?

No. The text field is a single line of up to 60 characters. For several lines, make a picture of them elsewhere and load it.

Can I get the stencil physically made?

No. The tool makes the file for you to cut yourself; it does not take orders.

What does Invert do?

It swaps cut and material. Tick it for light letters or shapes on a dark ground.