Skip to content
Find a tool

Silhouette Maker

Make a solid silhouette from a photo, with the threshold, hole filling and edge smoothing under your control.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

This silhouette maker keeps the subject as one solid black shape on white. The shape comes either from brightness, where darker pixels become the silhouette, or from the transparency of a PNG, where opaque pixels do. Holes inside the shape can be filled, edges can be smoothed from 0 to 10 pixels, and the result is traced into one vector path at the width in millimetres you set. You can download it as SVG, DXF, PDF or PNG. A photo of a dark subject against a plain light background gives the cleanest shape, and the stats line shows the finished size in millimetres.
Silhouette maker example

How to use the Silhouette Maker

  1. Drop a photo or PNG on the tool, paste one, or press Choose image. Try a sample loads a demo.
  2. Set Width (5 to 600 mm, default 100). The height follows the picture.
  3. Choose Shape from: Dark areas for a photo, or Transparency for a PNG whose background is already removed.
  4. Leave Black and white threshold on automatic, or move it up to 255. In Dark areas mode, pixels darker than this value become the shape. In Transparency mode it sets how opaque a pixel must be.
  5. Keep Fill holes ticked for a solid shape. Untick it to keep inner gaps such as the space between an arm and a body.
  6. Set Smooth edges (0 to 10, default 2) to round jagged outlines before tracing.
  7. Raise Remove specks up to (0 to 40, default 8) to drop stray dots, and adjust Smoothing (0 to 100, default 50) for curve rounding.
  8. Tick Invert to swap the shape and the background, which suits a light subject on a dark ground.
  9. Compare Original and Result, then press Download SVG, Download DXF, Download PDF or Download PNG.

The stats line shows the finished size in millimetres, so check it against the material before you cut. If stray dots appear in the shape, raise Remove specks up to.

How do I turn a PNG or JPG into a silhouette?

Load the picture and pick where the shape comes from: brightness for a photo, transparency for a PNG with the background already removed. The tool fills the shape, smooths its edge and traces it into one vector outline at your width. Then you download the file you need.

  1. The shape is found with the threshold you set, or with an automatic value for the picture.
  2. Inner holes are filled when Fill holes is on.
  3. The edge is smoothed by Smooth edges pixels.
  4. The mask is traced to a vector path and sized to your width in mm.

Should I make the shape from brightness or from transparency?

Use Dark areas when the picture is a photo, and Transparency when it is a PNG with a see-through background. The same threshold slider is read differently in each case.

Shape fromWhat becomes the silhouetteWhat the threshold doesAutomatic value
Dark areasPixels darker than the threshold; transparent pixels count as whiteHigher = more of the picture goes blackOtsu’s method on the picture
TransparencyPixels at least as opaque as the thresholdHigher = only the most solid pixels stay128

What makes a good silhouette photo?

A clear subject against a plain, evenly lit background gives the best result, because the threshold can then separate them in one step. A busy background turns into part of the shape. For those pictures, remove the background first and load a transparent PNG with Transparency selected.

Can I make silhouettes from group photos?

Yes. People who overlap or stand close together merge into one shape, because the tool makes a single path. Leave space between subjects if you want to see where one ends and the next begins.

Will the silhouette look like the original subject?

Only as far as the contrast allows. Dark clothing against a dark wall merges with it, and light hair against a light wall drops out. Moving the threshold, or adjusting the brightness in a photo editor first, shifts which parts count as the subject.

What can I use a silhouette for?

A solid shape works as a vinyl or paper cut file, a laser-cut or engraved sign, a stencil base, or a flat graphic. DXF suits CAD and laser programs, SVG suits design software and cutting machines, and PNG is a black-and-white bitmap for preview.

Answers to common questions

What is a silhouette PNG?

It is a picture where the subject is one flat colour, usually black, on a plain or transparent background. This tool’s PNG download is the black shape on white.

Can I create silhouettes on my phone?

The tool is a web page, so you can open it in a phone browser and choose a photo.

Does Fill holes remove the spaces between arms and body?

It fills holes that are fully enclosed by the shape, such as gaps between an arm and a torso. Untick it to keep them as openings.

Why does part of my subject disappear?

Those parts are lighter than the threshold, so they count as background. Lower the threshold slightly, or use Transparency on a cut-out PNG.

Does it remove the background automatically?

No. The shape is found by brightness or by transparency. It does not detect people or objects, so a busy background needs a clean picture or a transparent PNG.

What does Invert do?

It swaps the shape and the background. Tick it for a light subject on a dark background.

How is this different from an outline?

A silhouette is a filled shape. For a thin contour line around the subject, use Photo to Outline.