Photo to Stencil
Make a stencil from any photo, with bridges added so the centre of an O or an eye does not fall out.
Free · runs in your browser · nothing is uploaded
Recent
Your last 10 settings, saved only in this browser. Nothing is uploaded.

How to use the Photo to Stencil tool
- Drop a picture on the tool, paste one, or press Choose image. Try a sample loads a demo.
- Set Width (5 to 600 mm, default 100) to the size of the finished stencil.
- Leave Black and white threshold on automatic, or raise it toward 255 to decide which tones count as dark. Dark areas are cut away.
- Set Bridge width (0.5 to 6 mm, default 1.5). Pick a wider bridge for soft or thin material.
- Set Drop islands smaller than (0 to 10 mm, default 1) to remove tiny specks of material instead of bridging them.
- If the edges look rough, raise Remove specks up to (0 to 40, default 8) or Smoothing (0 to 100, default 50). Use Brightness and Contrast (-100 to 100) to separate the tones first.
- Tick Invert when the part you want cut away is the light part of the photo.
- Compare the Original and Result tabs, then read Islands and Bridges in the stats line.
- Press Download SVG, Download DXF, Download PDF or Download PNG.
Change one control at a time. If a bridge runs through a detail you want to keep, try a narrower Bridge width or nudge the threshold so the island changes shape or merges with the body. Photos with strong contrast and a plain background need few adjustments.
How do I turn a photo into a stencil?
A photo has gray tones and a stencil has only cut or not cut, so the tool first makes the picture black and white and then repairs the pieces that would fall out. The order matters because the bridges depend on where the black areas end up.
- The picture is scaled to at most 1,200 px on its long side.
- Each pixel becomes black (cut) or white (material). The automatic threshold uses Otsu’s method; the slider overrides it.
- Specks smaller than Drop islands smaller than are filled or removed.
- Every loose island is joined to the main body along the shortest path across the cut area, using the bridge width you set.
- The result is traced to a vector shape at your chosen width in millimetres.
What are stencil bridges and how wide should they be?
A bridge is a strip of material left across a cut area to hold an island in place. Without it, the centre of an O would fall out when the stencil is cut. Width is a trade-off: wide bridges are sturdy and break up the shape more, and narrow ones keep the image cleaner but tear more easily in thin material.
The tool adds one bridge per island, so the counts rise with the number of enclosed shapes:
| Letter cut from solid black | Islands | Bridges added |
|---|---|---|
| O | 1 | 1 |
| A | 1 | 1 |
| B | 2 | 2 |
| 8 | 2 | 2 |
Can I turn the bridges off?
No. The smallest Bridge width is 0.5 mm, and an island always gets one. If your stencil must have no bridges at all, choose a picture with no enclosed shapes, such as a solid silhouette. The Silhouette Maker page makes those.
Which file formats can I download?
SVG, DXF and PDF are vector files sized to the width you set, and PNG is a black-and-white bitmap of the same stencil.
| Format | Contents | Use it for |
|---|---|---|
| SVG | Vector shapes at the width in mm | Cutting machines and design software |
| DXF | The same shapes as polylines | CAD and laser software |
| Vector page cut to the artwork | Printing at size | |
| PNG | Bitmap, black cut, white material | A preview, or software that wants a bitmap |
How do I use the stencil file?
Open the SVG or DXF in your cutter’s software, check the size shown matches your width, and cut a test piece first. Black in the bitmap is the cut area, and white is what stays.
Can I upload large files?
The page does not set a file size limit, and large photos are scaled down to 1,200 px on the long side before the stencil is made. Very large files depend on your device’s memory.
Answers to common questions
Does the photo have to be black and white?
No. Colour and gray photos are converted for you. A picture with strong contrast between the subject and the background gives the cleanest split. Transparent areas count as light, so they stay as material.
Can I make a multi-layer stencil?
No. The tool makes a single layer, one cut per photo. For a stencil with several colours, make separate black-and-white pictures, one for each colour, and run each through the tool.
Can AI turn a photo into a stencil?
This tool uses no AI model. A threshold sorts the pixels, and fixed rules find islands and add bridges, so the same photo and settings always give the same stencil.
What does Invert do?
It swaps the cut and material areas. Tick it when your subject is light on a dark background and you want the light parts cut away.
What does Drop islands smaller than do?
Material islands and cut specks with an area under this many square millimetres are cleaned up rather than bridged. Raise it if you see tiny floating dots in the result.
Which file should I use for a cutting machine?
SVG is the usual choice for cutters; use DXF for CAD or laser software that prefers it. Cut a test piece before the real job, since machines and materials differ.
What happens to my photo?
It is processed in your browser and is not uploaded.
Related tools
- Tattoo Stencil Maker: Use it when the stencil is a line drawing for skin transfer, not a cut-out.
- Stencil Maker: Use it to make a stencil from a logo or from typed text.
- Silhouette Maker: Use it when you want one solid shape without islands or bridges.
- Photo to Outline: Use it when you need only a contour line around the subject.
- Photo to Line Art: Use it for a drawing made of thin lines instead of solid cut areas.
- Line Art Converter: Use it to clean up an existing drawing.
- Centerline Tracing: Use it when a thick stroke should become one line for a plotter.
- Convert Image to Cut File: Use it for the Cricut and Silhouette cut-file presets.