Skip to content
Find a tool

Photo to Outline

Get an outline of the subject or of the edges inside a photo, as vector lines with a width in millimetres.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

Photo to outline works in two ways here: it draws a line around the outside of your subject, or it traces the edges inside the picture. In the first style the tool finds the subject’s silhouette and draws a band of 0.2 to 6 mm just outside it. In the second it detects edges and thickens them to the same line width. Either way the lines are traced into vector paths at the width in millimetres you set, and you download them as SVG, DXF, PDF or PNG. A photo with a clear subject on a plain background gives the cleanest outer outline, and an everyday photo gives plenty of edges for the second style.
Photo to outline example

How to use the Photo to Outline tool

  1. Drop a photo on the tool, paste one, or press Choose image. Try a sample loads a demo.
  2. Set Width (5 to 600 mm, default 100) to the size of the finished outline.
  3. Pick Outline of: The subject (outer outline) or The edges inside the picture.
  4. Set Line width (0.2 to 6 mm, default 1.2). This is the real thickness of the drawn line.
  5. For the subject style, leave Black and white threshold on automatic, or raise it toward 255 to include more of the picture. Keep Fill holes ticked to outline only the outside, or untick it to outline inner gaps as well.
  6. For the edges style, adjust Line detail (blur) (0.5 to 4, default 1.2) and Line amount (-40 to 40, default 0). Small steps in Line amount make large changes, so stay between about -5 and +1; on a low-contrast picture a value near -10 can remove every line.
  7. Tick Invert if the subject is light and the background is dark.
  8. Compare Original, Result and Overlay, then press Download SVG, Download DXF, Download PDF or Download PNG.

The stats line shows the finished size in millimetres. Check it against your material before cutting or printing, and keep a test piece to compare against the screen.

What is the difference between an outline and line art?

An outline is the line around a shape, or the main edges of it. Line art is a drawing of all the lines in a picture, including shading edges and texture. This tool’s Outer outline style gives one band around the subject; its Edges style is closer to line art, with the line width set in millimetres. For a full drawing with a thickness setting in pixels, use Photo to Line Art.

StyleWhat you getSettings that matter
The subject (outer outline)One band just outside the silhouetteThreshold, Fill holes, Line width
The edges inside the pictureLines along detected edgesLine detail (blur), Line amount, Line width

How do I outline an image?

Load the picture, choose the style, set the line width and width in millimetres, and download. The subject style first builds a silhouette from brightness and fills holes, then draws a ring outside it using an exact distance measurement. The edges style detects edges and grows them to your line width.

  1. The picture is scaled to at most 1,200 px on the long side.
  2. The tool makes either a silhouette ring or an edge drawing.
  3. The pixels are traced to vector paths.
  4. The paths are sized to your width in millimetres.

How detailed are the outlines?

For the subject style the detail is the shape of the silhouette, so smooth and simple. For the edges style, Line detail (blur) decides how fine the lines get: low values pick up small features, and high values keep only broad shapes. Line amount is sensitive: on a synthetic test picture, a step from 0 to +1 raised the share of black from about 2% to about 11%, and a few steps higher turned most of the picture black. Negative values keep only the strongest edges.

What file formats can I download?

FormatContents
SVGVector paths sized in mm
DXFThe same shapes for CAD or laser software
PDFVector page cut to the artwork
PNGBlack lines on white, as a bitmap

Can I use an outline for a colouring page?

Yes. The Edges style makes black lines on white, and the PNG prints as a colouring page. Raise Line width if the lines look faint when printed, and use a plain-background photo so the page is not crowded with lines.

Answers to common questions

What does Fill holes do?

With Fill holes on, gaps inside the silhouette are treated as part of the subject, so only the outside is outlined. Off, each inner gap gets its own outline as well.

Does the outline sit on the edge or outside it?

In the subject style the band lies just outside the silhouette, so the subject itself keeps its full size. In the edges style the lines follow the detected edges and grow to the line width.

Is the line width a real size?

Yes. Line width is a distance in millimetres, so a 1.2 mm line stays 1.2 mm whatever Width you choose. The picture grows or shrinks around it.

What kind of photo works best for the outer outline?

A dark or distinct subject against a plain, even background. A busy background becomes part of the silhouette, and the outline then follows everything dark.

Is it safe to upload images?

Nothing is uploaded. The picture is processed in your browser.

Which settings apply to which style?

Subject style reads the threshold and Fill holes. Edges style reads Line detail (blur) and Line amount. A control that belongs to the other style has no effect.

What does Invert do?

It swaps the subject and the background before the outline is made. Tick it for a light subject on a dark ground.