Laser Engraving Prep
A laser reads lines for cutting and dots or gray levels for engraving. These tools prepare a picture for either job and show what the laser will receive before you send it.
Tools in this group
- Halftone Generator
Make a halftone from any picture with the cell size and grid angle you choose, as clean vector dots.
- Image to Gcode
Convert a picture into line-by-line laser G-code with the feed, power and spacing you set.
- Laser Engraving Image Converter
Prepare a photo for a diode or CO2 laser: set the width and line density, choose a dither, and see the burned area.
- Laser Kerf Calculator and Offset Tool
Transform your graphics and files into production-grade vector paths ready for CNC cutters, laser engravers, plotters, and embroidery machines.
- Stipple Image Generator
Turn a photo into a stipple drawing made of dots whose density follows the shading.
- SVG for Laser Cutting
Turn an image into laser-ready paths: red hairlines to cut or black fills to engrave, at an exact width in millimetres.
- SVG to Gcode Converter
Turn the paths of an SVG into G-code with the width, feed rate and laser power you set, and read the time estimate before you download.