Image to Embroidery File
Turn simple artwork into a stitch file, preview the stitches and see the stitch count before you download.
Free · runs in your browser · nothing is uploaded
Recent
Your last 10 settings, saved only in this browser. Nothing is uploaded.

How to use the Image to Embroidery Converter
- Press Choose image, or drop or paste a picture. Try a sample shows the result without a file.
- Set Colors (1 to 12, default 3). The background is removed first, then the picture is reduced to this many colours.
- Set Width (5 to 600 mm, default 80). It is the width of the whole picture, white margin included, so the stitched design is narrower when the picture has a border (the sample’s 80 mm gives a 67 mm design). Size under the preview is the real stitched size, and the hoop check uses it.
- Raise Remove specks up to (0 to 40, default 12) if tiny blobs appear in the preview.
- Pick an Outline: Running stitch (default), Satin column or None.
- Set Stitch density (row spacing) (0.25 to 0.8 mm, default 0.4). Smaller numbers pack the rows closer.
- Set Stitch length (1 to 6 mm, default 3).
- Keep Underlay ticked, its default, for a firmer base under each fill.
- Tick Invert only if the picture is a negative.
- Choose a File format: DST (Tajima), PES (Brother), EXP (Melco) or JEF (Janome). DST is the default.
- Check the stitch preview and the readout, then press Download DST (or the format you chose). Download SVG saves the traced shapes.
Start with a simple picture of two or three flat colours and a clear outline.
How do I convert an image into embroidery?
Load a simple picture, keep the colour count low, set the width in millimetres and download the format your machine reads. The tool traces flat colour regions, fills each with stitches and writes the file. Each fill colour becomes one colour stop in the file.
Every filled shape gets the same treatment:
- An underlay of sparse rows (2 mm apart, set 0.5 mm inside the edge) at right angles to the fill.
- A tatami fill at 45 degrees, using your row spacing and stitch length.
- A running-stitch or satin outline, if you chose one.
A trim is written after a jump longer than 3 mm. Shapes smaller than 1 square mm are left out and the page tells you how many.
How does stitch density change the stitch count?
Row spacing sets how many rows of stitches cover a shape. The rows per 10 mm of height are 10 divided by the spacing, so tighter spacing means more stitches.
| Row spacing | Rows per 10 mm |
|---|---|
| 0.25 mm | 40 |
| 0.4 mm (default) | 25 |
| 0.6 mm | 16.7 |
| 0.8 mm | 12.5 |
In an engine test, a 20 x 20 mm square at 0.4 mm spacing gave 50 rows and 436 stitches.
What is the difference between PES, DST and JEF?
They hold the same needle positions in different layouts. Pick the one your machine reads. Thread colours are stored differently, as the table shows.
| Format | Menu label | Thread colours in the file |
|---|---|---|
| DST | Tajima | None, you choose threads at the machine |
| PES | Brother | Nearest of 64 Brother thread colours; written as version 1 |
| EXP | Melco | None |
| JEF | Janome | Nearest colour in a Janome palette |
How big is the stitched design?
Width sets the width of the stitched design in millimetres, up to 600 mm, and the page reports the resulting size. It checks that size against four hoop fields printed in Brother’s manual, in either orientation: 100 x 100, 130 x 180, 200 x 200 and 200 x 360 mm. No margin is subtracted, so allow room around the design.
On a synthetic test image with the default settings the tool reported 4,829 stitches, 9 jumps, 9 trims, 2 colours, 67.3 x 67.5 mm and about 12.6 m of thread. That design fits all four hoops. Your picture will give other numbers.
What are the limits of this converter?
The files have no lock stitches at the start and end, so check that your machine software adds them. DST has no thread colours. The PES file is version 1. The files were verified by reading them back with pyembroidery 1.5.1, not by sewing them on a physical machine, so test-stitch on scrap fabric first.
Answers to common questions
Can I convert JPG to DST or PNG to PES?
Yes. Load the JPG or PNG, then pick DST or PES in File format and press the download button.
Which image formats and sizes work?
Any image your browser can open. Large pictures are reduced to 3,000 px on the long side when loaded and traced at up to 1,500 px.
How many thread colours should I use?
Start with the default of 3. The slider runs from 1 to 12, and each colour is one thread change at the machine.
What makes a good image for embroidery?
Bold, flat shapes with clear edges. Gradients, photographs and fine lines turn into noisy shapes, so raise Remove specks up to or simplify the picture first.
Is my image private, and do I need software?
The tracing runs in your browser and the page makes no upload request. You need no program, only a browser.
How accurate is automatic digitizing?
It suits simple artwork. Professional digitizing software does better on detailed art, so look at the preview before you stitch.
Can I use the files commercially?
The terms of this site say what you create with its tools can be used commercially. You still need the rights to the picture you load.
Does it add lock stitches?
No. The file starts and ends without lock stitches.
Related tools
- SVG to DST Converter: use it when your artwork is already an SVG and you need a DST file.
- SVG to PES Converter: use it when your artwork is an SVG and your machine reads PES.
- Embroidery File Converter: use it to change an existing stitch file from one format to another.
- Reduce Image Colors: use it to cut a picture to a few flat colours before digitizing.
- Posterize Image: use it for flat colour bands from a photo.
- Embroidery Tools: use it to see every embroidery page here.
- Photo to Line Art: use it when you want line work from a photo.
- Convert Image to Cut File: use it when you need a cutting file rather than stitches.