Skip to content
Find a tool

Image to DXF Converter

Turn any bitmap into DXF outlines at a real size, and see what the file contains before you open it in CAD.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

To convert an image to DXF, the tool traces the bitmap into black and white shapes and writes them as closed polylines in millimetres, ready for CAD, laser or vinyl cutting software. It reads any picture your browser can open, such as PNG, JPG, WebP, GIF or BMP, whether it is a logo, a photo or a scan. You type the real width, pick DXF R12 or R2000 and download. SVG and PDF copies come from the same trace, so you can compare the outline with your original before the DXF reaches your CAD program. Logos and line art give the cleanest paths, while a photo becomes a silhouette. The sections below show what the file contains and which version to try first.
Image to dxf example

How to convert an image to DXF

  1. Choose your image, drop one on the tool or paste one from the clipboard. Try a sample loads a test picture if you only want to see the tool work.
  2. Set Width (5 to 600 mm, default 100). This is the width of the whole picture in the DXF’s millimetre space, empty margin included, and the height follows the picture. The traced shapes keep their place inside it, so with a white border they measure less than this figure; crop the picture tight if the shapes must be exactly this wide.
  3. Leave Black and white threshold on automatic (0) for most logos. For a photo, move it between 1 and 255 until the subject becomes one clean dark shape.
  4. Raise Remove specks up to (0 to 40, default 8) if the trace picks up dust or noise.
  5. Adjust Smoothing (0 to 100, default 50) for rounder outlines, and Contrast (-100 to 100, default 0) for faint scans.
  6. Tick Invert if the part you want to cut is the light area.
  7. Set Smallest feature (0 to 5 mm, default 0.5) to drop shapes too small to cut.
  8. Choose a DXF version: R12 (AC1009, the default) or R2000 (AC1015).
  9. Switch to the Overlay view to compare the outline with the original, then click Download DXF. Download SVG and Download PDF give copies of the same trace.

What is inside the DXF file?

The file holds closed polylines in millimetres, one per traced shape, and nothing else: no raster image, no text. Curves are flattened into short straight segments. The table lists what the writer puts in the file.

ItemWhat the file has
VersionR12 (AC1009) by default, or R2000 (AC1015)
Shape entitiesR12: POLYLINE, VERTEX, SEQEND. R2000: LWPOLYLINE
UnitsMillimetres, with $INSUNITS set to mm
LayersOne per fill colour, named like COLOR_000000 for black
OrientationY axis flipped, so the drawing is upright in CAD

What do Remove specks up to and Smallest feature each do?

Both throw away small shapes, but at different moments. Remove specks up to discards tiny patches while the tracer works, measured in pixels of the traced copy. Smallest feature discards finished shapes below a size in millimetres, so its effect depends on the Width you set.

ControlMeasured inUse it for
Remove specks up toTraced pixelsDust and scan noise
Smallest featureMillimetresPieces too small to cut

Which DXF version for AutoCAD, Fusion or LightBurn?

Try R12 first. It is the default and the oldest widely read version, so it is the safest first download. If your program shows a problem on import, download R2000 and try again. LightBurn lists DXF among its import formats in its documentation, and AutoCAD and Fusion both read DXF. We have not tested each program ourselves.

Can a photo be converted to DXF?

Yes, as a silhouette. A DXF holds outlines, and a photo has none, so the threshold turns the photo into dark and light areas and the file contains the outline of the dark ones. Pick a photo with a clear subject against a plain backdrop, then use Contrast and the threshold until the subject becomes one clean shape. Busy photos produce many small shapes; raise Remove specks up to to thin them out.

Answers to common questions

What image formats can be converted to DXF?

Any picture your browser can open, usually PNG, JPG, WebP, GIF and BMP. They all go through the same trace.

Is the scale correct?

The drawing is as wide as the Width you typed, in millimetres. Measure one known dimension in your CAD program to confirm after import.

Is there an offline option?

There is no installable version. The tracing runs in your browser tab and the picture is not sent anywhere, but the page loads its engine on first use, so we do not offer an offline mode.

Can I convert a logo to DXF?

Yes. A logo traces cleanly, but the DXF holds only the dark shapes against the light ones. If the logo has several colours that must stay separate, use the cut file page, which writes one DXF layer per colour.

What images work best?

Pictures where dark shapes sit on a plain light ground: logos, silhouettes, line art, lettering and stencils. Photos and grey scans need a threshold first.

Does JPG compression affect the result?

Yes. JPG compression leaves speckle along edges, and the tracer can read it as tiny extra shapes. Raise Remove specks up to or start from a less compressed file.

How accurate is the conversion?

The width is exact. The outline follows the trace, which works on a copy of at most 1,600 pixels on the long side, so compare the SVG or Overlay view with your original before cutting.