Skip to content
Find a tool

Halftone Generator

Make a halftone from any picture with the cell size and grid angle you choose, as clean vector dots.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

This halftone generator lays a rotated grid over the picture and puts one dot in every cell, sized so that its area matches how dark that cell is. Dark parts get large dots and light parts get small ones or none. You pick the dot shape (circles, squares, diamonds or lines), the cell size from 3 to 40 working pixels, the grid angle from 0 to 90 degrees and the output width in millimetres. The dots are vector shapes, and you download them as SVG, DXF or PDF. The stats line shows the dot count, and a table below converts cell size into millimetres and lines per inch.
Halftone generator example

How to use the Halftone Generator

  1. Drop a picture on the tool, paste one, or press Choose image. Try a sample loads a demo.
  2. Set Width (5 to 600 mm, default 100). The height follows the picture.
  3. Choose a Dot shape: Circles, Squares, Diamonds or Lines. Lines become bars whose thickness follows the tone.
  4. Set Cell size (3 to 40, default 10). Small cells give fine detail and many dots, and large cells give a coarse, bold pattern.
  5. Set Grid angle (0 to 90 degrees, default 45). At 0 the dots form straight rows and columns.
  6. Use Contrast (-100 to 100) to separate light and dark tones, and Gamma (0.3 to 3, default 1) to lighten or darken the middle tones. A value above 1 brightens the picture and gives smaller dots.
  7. Tick Invert to put the large dots on the light parts of the picture instead of the dark parts.
  8. Read the dot count in the stats line and compare Original and Result.
  9. Press Download SVG, Download DXF or Download PDF.

There is no PNG download. Open the SVG in an image editor if you need a bitmap. Check the finished size in the stats line before you print or cut, and zoom into the preview to check whether the smallest dots are still visible at your width.

How do I turn an image into a halftone?

Load the picture, choose a dot shape and cell size, and set the width in millimetres. The tool measures the average darkness of the picture inside every cell of the rotated grid and draws one dot there. The dot’s area is proportional to that darkness, so the pattern stands for the tones of the picture.

  1. The picture is reduced to at most 1,000 px on its long side.
  2. A square grid of your cell size is rotated by the grid angle.
  3. Each cell gets a dot whose area equals its average darkness times the cell area.
  4. Dots with a radius under 0.15 px are left out, and the result is scaled to your width.

How big is a halftone cell in millimetres?

Cell size is counted in pixels of the working picture, so its real size depends on Width. For a picture that is 1,000 px wide set to 100 mm, one pixel is 0.1 mm. Lines per inch is 25.4 divided by the cell size in millimetres.

Cell sizeCell at 100 mm wideLines per inch
30.3 mmabout 85
10 (default)1.0 mmabout 25
202.0 mmabout 13
404.0 mmabout 6

A wider output scales every cell with it: at 200 mm the default cell is 2.0 mm. Pictures smaller than 1,000 px are not enlarged, so their pixels, and their cells, come out larger in millimetres.

Which halftone shapes are available?

Circles, squares, diamonds and lines are available. For the same darkness all four cover the same area, so the tones match and only the look changes. Circles are the classic newspaper dot, squares give a blockier look, and lines make a striped pattern whose bars get thicker where the picture is darker. Try each on the preview before you export.

What angle should I use?

The default of 45 degrees is the traditional angle for a single black screen. Use 0 for straight rows and columns, which suits pixel-art looks or when the dots must line up with a machine axis. Any angle from 0 to 90 is allowed, and the dot field is rotated around the picture’s centre.

What happens in very dark and very light areas?

Circles touch their neighbours when a cell is about 79% dark. Darker cells have circles that overlap, so their outlines cross each other. Light areas lose dots altogether when the dot would be tiny. If that matters for a laser job, raise Gamma a little so the darkest cells stay below the touching point.

Answers to common questions

What file formats can I download?

SVG, DXF and PDF, all with the dots as vector shapes at the width you set. There is no PNG download.

Does the SVG have a background?

No. The dots are drawn alone, so the SVG is transparent around them. Transparent areas in your source count as white and get no dots.

Can I make a colour or CMYK halftone?

No. The dots are black only, one ink. For several colours, make separate black-and-white versions and colour them in other software.

Can I use the dots for laser engraving?

Yes. Download the DXF or SVG and open it in your laser software at the same size. The dots are filled shapes. These files have not been run on real machines here, so test on scrap material first.

Is the halftone made on my device?

Yes. The picture is processed in your browser and is not uploaded.

Why does my image look too dark or too light?

Use Gamma and Contrast before changing the cell size. Gamma above 1 shrinks the dots, below 1 enlarges them. Invert swaps the tones.

Can I choose lines per inch directly?

Not directly. Choose the cell size and the width, and use the table above to read off the lines per inch.