Skip to content
Find a tool

Embroidery File Converter

Convert between the four main machine formats and check the stitch count before you sew.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

An embroidery file converter changes a stitch file from one machine format into another. This one reads DST, EXP, JEF and PES files and writes DST, EXP, JEF or PES version 1. DST, PES and JEF are recognised from the bytes of the file, while EXP has no signature, so the .exp extension decides. Before you download, the page shows the stitches, jumps, colour count, size in millimetres and estimated thread length, with a stitch preview and a check against four hoops. Use it for jobs such as DST to PES for a Brother machine or PES to DST for a Tajima machine. The writers were checked against pyembroidery, not on a physical embroidery machine.
Embroidery file converter example

How to use the Embroidery File Converter

  1. Press Choose embroidery file, or drop a file on the page. It accepts .dst, .pes, .exp and .jef. Try a sample loads a small DST so you can see the readout first.
  2. Wait a moment the first time. The message “Loading the engine…” appears once while the converter downloads.
  3. Read the line under the preview: Size in millimetres, Colors, Stitches, Jumps and Thread (est.). A second note says which hoops the design fits, for example “Fits hoops: 100x100, 130x180 mm”.
  4. Look at the stitch preview, which draws the stitches in thread order.
  5. Open File format and pick DST (Tajima), PES (Brother), EXP (Melco) or JEF (Janome). The menu starts on PES (Brother).
  6. Press the download button, which is named after the format, for example Download PES.
  7. Open the new file in your machine’s software and check the colours before you sew. A DST or EXP file carries none.

Converting a file does not change its stitch positions beyond rounding to 0.1 mm. If the file is not recognised, the page says so instead of guessing.

Keep the original file. Converting to DST or EXP drops thread colours, and converting to JEF drops trim commands, so a copy in the new format cannot always be turned back into what you started with.

Which formats can I convert between?

Any of the four readable formats can be saved as any of the four writable ones. DST, EXP and JEF are read and written as they are, and PES is written as version 1. A PES file you load can be any version; the converter was tested with versions 1 and 6. Other formats such as VP3, HUS or XXX are refused with “This format is not supported.”

You loadYou can download
DSTDST, PES, EXP, JEF
PESDST, PES (version 1), EXP, JEF
EXPDST, PES, EXP, JEF
JEFDST, PES, EXP, JEF

What does each format keep?

Formats store the same needle positions in different ways, so some details change when you switch. Thread colours are the main loss.

FormatThread coloursTrimLongest single move
DSTNone storedThree small jumps in a row12.1 mm per record
EXPNone storedA trim code12.7 mm per record
PES (version 1)Nearest of 64 Brother thread coloursA flag on the jumpNot checked
JEFNearest Janome palette colourNot writtenNot checked

Longer moves are cut into equal jumps. A 250 mm jump becomes 21 jumps of at most 12.1 mm in DST.

Will colours survive PES to DST?

No. DST stores no thread colours, so a PES to DST conversion keeps the colour changes as stops but drops the colours themselves. Going the other way, from DST or EXP into PES or JEF, the output gets stand-in colours, which you replace on the machine.

Which format should I use for my machine?

Pick the format that belongs to your machine’s maker, as the File format menu labels them. Check your manual if you are unsure what it reads.

Maker named in the menuFormat
TajimaDST
BrotherPES
MelcoEXP
JanomeJEF

Can I preview a file before stitching?

Yes. The stitch preview draws the stitches in colour order, and the line below reports the numbers. The page compares the design size with four hoop fields taken from Brother’s manual, in either orientation. No safety margin is subtracted, so leave room around the design yourself.

Hoop fieldDesign must be within
100 x 100 mm100 x 100 mm
130 x 180 mm130 x 180 mm
200 x 200 mm200 x 200 mm
200 x 360 mm200 x 360 mm

Answers to common questions

Do I need to install anything, and is my file uploaded?

You need nothing but a browser. The conversion runs on the page and makes no upload request.

Is there a free way to convert embroidery files?

Yes, this converter costs nothing to use. Load the file, check the readout and download the format you need.

Which machines read DST, PES and JEF?

The menu pairs DST with Tajima, PES with Brother, EXP with Melco and JEF with Janome. Machines from those makers usually read their own format, but your manual has the exact list.

Can I convert DST to PES or PES to DST?

Yes, in both directions. The stitch positions carry over. A PES to DST copy loses its thread colours, and a DST to PES copy gets stand-in colours.

Can I convert JPG or PNG to DST here?

Not on this page, which reads embroidery files only. Make a stitch file from the picture with Image to Embroidery File, then convert that.

Does conversion change the stitches?

Only by rounding. Our files and pyembroidery 1.5.1 files were read back by each other and agreed within 0.1 mm.

Was the output tested on a real machine?

No. The files were checked by reading them with pyembroidery in both directions, not by sewing them on a physical machine.

Why does my file show a read error?

The file may be damaged, or it may be in a format outside DST, PES, EXP and JEF. Try the original from your design software.