Skip to content
Find a tool

Bulk PNG to SVG Converter

Drop a folder of logos or drawings, set the width and colors once, and download one ZIP of SVG and DXF files.

Free · runs in your browser · nothing is uploaded

Open on Outlinecut

This embed was switched off for this website. Open on Outlinecut

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

To bulk convert PNG to SVG, load up to 40 images at once and the tool traces every one with the same settings, then hands you a single ZIP holding an SVG and a DXF for each picture. Any image your browser can open works, not only PNG. You choose one width in millimetres and one colour count for the whole run, and a table lists the path count and file size of each result. The trace is the same one used on the Cricut page: closed paths, one per colour, with the background removed. The sections below cover what goes into the ZIP, which settings are shared and what happens past 40 files.
Batch image vectorizer example

How to vectorize many images at once

  1. Press Choose images or drop the files on the tool. Select up to 40; anything past the first 40 is ignored. Try a sample loads one test picture if you only want to see how the batch behaves.
  2. Set Width (5 to 600 mm, default 100). Every image is scaled to this width.
  3. Set Colors (1 to 12, default 4). Each colour becomes one path per image.
  4. Keep Remove the background ticked, its default, unless the background is part of the artwork.
  5. Raise Remove specks up to (0 to 40, default 8) to drop stray dots, and adjust Smoothing (0 to 100, default 50) for rounder curves.
  6. Set Smallest feature (0 to 5 mm, default 0.5) to drop pieces too small to cut.
  7. Read the results table. Its columns are File, Paths and File size, and a picture that failed says so in its row. The line below it shows how many files were Converted and how many Failed.
  8. Click Download ZIP.

A row with 0 paths means that picture came out blank, usually because it is fully transparent or empty. Every slider change re-runs the whole batch, so settle the settings on a few representative files first. One set of settings covers all images, so a photo and a logo are better run separately.

Can I vectorize multiple images at once?

Yes. The tool takes up to 40 images in one run, traces each with the same settings and packs the results into one download. Nothing is converted one by one by hand, and a single bad file does not stop the others.

In the ZIPWhat it is
name.svgThe colour trace as closed paths, at the width you set
name.dxfThe same shapes as a DXF R12 file in millimetres

Files are named after the source picture. The archive is called outlinecut-vectors.zip and is stored without compression, so its size is close to the sum of its files. A blank or fully transparent picture produces an empty SVG instead of an error.

Which settings apply to every image in the batch?

All six controls apply to the whole run: Width, Colors, Remove specks up to, Smoothing, Remove the background and Smallest feature. You cannot give one picture its own width or colour count. If two files need different treatment, run them as separate batches and download a ZIP for each.

There is no contrast, invert or DXF version control in batch mode, and the DXF is always R12. Use the single-image pages when you need those.

What happens to backgrounds and transparency in a batch?

A transparent PNG is flattened onto white before tracing, so the transparent area counts as the white background. With Remove the background ticked, that background is dropped from every file and does not use up one of your Colors. Untick it only when the backdrop is part of the artwork; the background then takes one of your colours as its own layer in every file.

The same rule applies to a JPG with a white, cream or other plain backdrop, since the background is taken from the colour along the picture’s edge (white when the artwork runs off every edge).

What file formats can I upload?

Any picture your browser can decode, which usually includes PNG, JPG, WebP, GIF and BMP. Pictures longer than 3,000 pixels on the long side are scaled down when they load, and the trace itself works at up to 1,500 pixels. Very fine detail can therefore be lost on huge scans. Set the width for the size you want to cut, not for the pixel count.

Answers to common questions

Is there a limit on batch size?

Yes, 40 images per run. If you select more, only the first 40 are read. For a larger set, run it in groups of 40 and download one ZIP per group.

Do my images leave my computer?

No. The tracing and the ZIP are both made inside your browser tab.

Can I convert JPG to SVG in colour?

Yes. Colors keeps 1 to 12 colour regions, and each region is a separate path in the SVG. Use a higher number for multicoloured artwork and a lower one for bold single-tone shapes.

Why does my photo look posterized?

The tracer replaces the picture with a small set of flat colour regions, so gradients turn into bands. Raise Colors toward 12 to keep more shading. For true photographs, keep the original raster file.

Can I mix PNG and JPG in one batch?

Yes. Your browser decodes each file on its own, so formats can be mixed. All of them still share the same settings.

What happens to a failed image?

Its row in the results table shows an error instead of a path count, and the failed count goes up. The other images are still converted and included in the ZIP.

What are SVG vectors good for?

Anything that has to scale or be cut: logos, icons, stickers and cutting-machine paths. Because an SVG stores outlines instead of pixels, it can be enlarged without going soft.